Anti-mould spray, Schimmelex

Anti-mould spray, Schimmelex

Anti-mould spray based on chlorine

Description

Anti-mould spray for DIY and commercial use, based on chlorine, for mineral surfaces and also... more

Anti-mould spray for DIY and commercial use, based on chlorine, for mineral surfaces and also for wood. Deadening and bleaching at the same time.

Spray mouldy surfaces with ADLER SchimmelEx and rinse off with clean water after 5 - 10 minutes. In case of severe infestation, repeat procedure.

Special Features

- Deadening and bleaching at the same time
- Active agent: 25 g sodium hypochlorite solution with at least 13g / 100g active chlorine

Application

For the removal of mould, algae and moss from mineral surfaces, emulsion colour coats and wood and/or coated wood. Very suitable for sanitary areas. Warning: In case of sensitive, dyed materials such as wall paper, wood, textiles, cork and metal, the colours may change. Immediately remove accidental paint spots with water.

Not suitable for aluminium and non-ferrous metals.
In case of wood rich in extractives, such as oak, discolorations can occur.
Note:
Warning: Do not use ADLER SchimmelEx together with other products, as hazardous gases (chlorine) may be discharged.

Application method: Spray generously. Spray mouldy surfaces with ADLER SchimmelEx and rinse
off with clean water after 5 - 10 minutes.

Safety instructions

Warning
Corrosive to metals, dermocaustic, massive eye damage GHS05 Caution GHS07 aquatic environment GHS09
signal word: Danger
Causes severe skin burns and eye damage (Hazard class: Skin corrosion/irritation, H314)
Causes serious eye damage (Hazard class: Serious eye damage/eye irritation, H318)
Very toxic to aquatic life (Hazard class: Hazardous to the aquatic environment, acute hazard, H400)
May irritate the respiratory system. (Hazard class: Specific target organ toxicity (single exposure, H335)